Basler Ace U acA2440-20gc 2448 x 2048 Color CMOS GigE Camera

2448 x 2048 images at 23 frames per second
Excellent quantum efficiency, dynamic range, SNR
PGI image enhancement
Compact 42 x 29 x 29 mm housing
Power over Ethernet (PoE) support

Description
The ace series of cameras offer fantastic value. The acA2440-20gc is built on the Sony Pregius IMX264 2/3" sensor. It offers 5 MP (2448 x 2048) resolution with astounding image quality: high quantum efficiency, wide dynamic range, and extremely low noise.

When this camera is configured to use the sensor's full resolution, it can deliver 20 frames/second ("fps"). However, when configured to use less resolution, the frame rate will increase. As examples, 2048 x 2048 delivers 25.4 fps, 2448 x 1080 delivers 40.4 fps, and 2448 x 480 delivers 90.8 fps. (Note maximum frame rate also depends on the output format, exposure time, and network hardware.)

This camera features Basler PGI in-camera image optimization, including 5x5 debayering and color anti-aliasing for improved sharpness and reduced noise.

This camera has a global shutter for “stop-action” imaging. The camera can output a flash window signal to control the light source.

Because the Basler ace GigE camera uses the same 29 x 29 mm footprint that has been standard on analog cameras for many years, replacement of analog cameras is easy. Some existing Camera Link cameras and IEEE 1394a or 1394b cameras with this same footprint can also be easily replaced.

Using a Power over Ethernet (“PoE”) configuration, a single cable may be used to apply camera power and to transfer data between this camera and a PC, keeping cable runs to a minimum. An auxiliary connector is provided for terminating the input and output signal – there is one of each. The input may be configured to trigger image acquisition, reset the frame counter, or reset the software trigger count. The output may be configured to indicate acquisition trigger wait, exposure active, flash window, or timer active. Or the output may be controlled via a PC. The auxiliary connector may be used to power the camera if PoE is not available.

The Basler ace provides a full set of features to address a wide range of applications. Pixel data can be output in 8 or 12 bit depth. You may adjust the camera’s black level, gain, area of interest, input debounce, and trigger delay. It features automatic exposure control, pixel binning, horizontal image mirroring, event reporting, sending of test images, and a programmable lookup table. There are also “chunk” features that include a frame counter, time stamp, trigger input counter, and CRC checksum calculator. Note that not all features may be available when using third-party software.

Because this camera is GigE Vision and GenICam compliant, there are many third party software applications and API’s that are compatible.

Specifications
Mechanical
Lens Mount: C-Mount
Miscellaneous
Sensor Resolution: 2,448 (h) x 2,048 (v) pixels
Sensor Size: 11.01 mm (2/3")
Sensor Model: Sony IMX264LQR
Chroma: Color Bayer
Shutter Type: Global
Frame Rate (full resolution): 23.0 frames/second
Quantum Efficiency: 65.0 %
Dark Noise: 2.0 e-
Saturation Capacity: 10.5 ke-
Dynamic Range: 73.0 dB
Signal-to-Noise Ratio: 40.0 dB
Test Method: EMVA 1288 for Mono
Data Interface: Ethernet Gig-E Vision
Data Rate: Gigabit Ethernet

Bargaining Is Appropriate!)
Purchase discount +1...

novi.trast12@gmail.com